|
|
Car-battery charger
Kadlec, Josef ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
This bachelor’s thesis is considered by projection and construction of the car battery charger with switching source. One-pulsed conducting changer is base of this charger. The charger is intended for accumulators of nominate voltage 6 and 12V. Accumulators are charged by method of constant voltage with current limitation of 0.5A, 5A, 20A and 50A. Value 50A has reason during stating of car for example in winter, because the charger helps to battery. The device is equipped with additional protection, which protects the charger and also the accumulator and the supply network. Three pilot lights are the next equipment of the device.
|
|
|
Charger for lead-acid accumulators 12V with the aditional fuction "start-car"
Benada, Tomáš ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
This thesis is engineering design of the intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR". It contains calculations of each component. The switching power supply is the mainstay of the charger that makes the charger small, lightweight and portable. The Intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR“ charges the accumulator by method of constant voltage with current limitation of 0,5A, 5A, 20A, 50A. 50A current is used in winter during starting of a car, when the battery can´t provide sufficient current. The device comprises safety protection for the charger, supply network and battery. There are three LEDs placed on the front side of the charger reflecting status of the device.
|
|
|
Inverter 12 V DC to 230 V AC with Protection
Navrátil, Petr ; Šilhavý, Pavel (referee) ; Kubánek, David (advisor)
This bachelor thesis deals with converter, which alters 12 V of direct input Voltage to 230 V of alternating Voltage output with frequency of 50 Hz. Introduction describes the basic parting of convertors. The chosen concept of designed convertor was based on that chapter. The practical part describes construction of this convertor including necessary safety shielding. At the end, the construction of the converter was tested by practical measuring and it was proven that the result meets with required values with slight anomaly.
|
|
|
Intelligent charger for lead-acid accumulators 12V/130A with an option "start-car"
Láznička, Martin ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
This bachelor's thesis is considered on a basic description of car battery charger with a support function “start-car”. A switching power supply creates a base of the equipment-this is why the charger is compact and easily portable. It is designed for 6V and 12V batteries. A charging by a constant voltage with a current limitation (to 0.5A, 5A or 20A) is used. The charger maximal current is 120A for a short-term load, so a proposal of an appropriate thermal protection is included in the project.
|
|
|
Verification series of fast-chargers for lead-acid accumulators 12V and 6V
Benada, Tomáš ; Huták, Petr (referee) ; Vorel, Pavel (advisor)
This thesis is an engineering design of an intelligent fast-charger for lead-acid accumulators. It contains calculations of each component. The switching power supply is the mainstay of the charger that makes the charger portable, lightweight and small. The Intelligent fast-charger for lead-acid accumulators charges the accumulator by method of constant voltage with current limitation of 0,5A, 5A, 10A, 50A. 50A current is used in winter during starting of a car, when the battery can´t provide sufficient current. There are three LEDs placed on the front side of the charger reflecting status of the device. The device comprises safety protection for the charger, supply network and battery.
|
|
|
Auxiliary inverters for electric traction
Polášek, Petr ; Pazdera, Ivo (referee) ; Červinka, Dalibor (advisor)
This thesis concerns with specified problems of an electric traction. It deals with the concept of module controlling EC motor of the voltage 24V and the current 100A. There are described possibilities and principles of controlling EC motor in detail. For controlling, the single-purpose IO MC33035, which is directly specified for it, is used. The thesis describes implementation of both testing and final versions of converter for a circulating pump drive of a cooling circuit in locomotives. The convertor is partly universal and can be used in other applications. According to the implemented convertor, a laboratory test and a model protocol were made. In the second part, the concept is described as well as the implementation of DC/DC conventor of output voltage of 24V and which is supplied by 12V battery. The specified output current is 4A. It is used for supplying of the controlling traction vehicle unit and is installed as a boost convertor which contains a resonance conventor. The presentation of measured parameters of the complete convertor is either a part of this thesis.
|
|
|
Traction Li-ion accumulator 28V/40Ah with internal protecting and control circuits
Kovář, Robert ; Pazdera, Ivo (referee) ; Vorel, Pavel (advisor)
This work is a design and construction solution for an inteligent charger of Li-Ion battery system.The system consists of an accumulator, built out of individual cells (serial-parallel sequence), protective and monitoring circuits and charger with control circuits. These control circuits of this charger collaborate with monitoring circuits. The base of this charger is a switching source (singlemode buck converter with transformer).The charger allows to supply relatively high power while sustaining small dimensions.(20A with 28V that´s 560W) Use of DC/DC converter is a base of charger and also delivers other benefits, such as high efficiency and easy control of output current.
|
|
|
Inverter 12 V DC to 230 V AC with Protection
Navrátil, Petr ; Šilhavý, Pavel (referee) ; Kubánek, David (advisor)
This bachelor thesis deals with converter, which alters 12 V of direct input Voltage to 230 V of alternating Voltage output with frequency of 50 Hz. Introduction describes the basic parting of convertors. The chosen concept of designed convertor was based on that chapter. The practical part describes construction of this convertor including necessary safety shielding. At the end, the construction of the converter was tested by practical measuring and it was proven that the result meets with required values with slight anomaly.
|
|
|
Intelligent charger for lead-acid accumulators 12V/130A with an option "start-car"
Láznička, Martin ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
This bachelor's thesis is considered on a basic description of car battery charger with a support function “start-car”. A switching power supply creates a base of the equipment-this is why the charger is compact and easily portable. It is designed for 6V and 12V batteries. A charging by a constant voltage with a current limitation (to 0.5A, 5A or 20A) is used. The charger maximal current is 120A for a short-term load, so a proposal of an appropriate thermal protection is included in the project.
|
|
|
Charger for lead-acid accumulators 12V with the aditional fuction "start-car"
Benada, Tomáš ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
This thesis is engineering design of the intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR". It contains calculations of each component. The switching power supply is the mainstay of the charger that makes the charger small, lightweight and portable. The Intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR“ charges the accumulator by method of constant voltage with current limitation of 0,5A, 5A, 20A, 50A. 50A current is used in winter during starting of a car, when the battery can´t provide sufficient current. The device comprises safety protection for the charger, supply network and battery. There are three LEDs placed on the front side of the charger reflecting status of the device.
|
guest ::
